來源:http://www.speif.com/ 發布時間:2018-08-27
雨季馬上就要來臨,這個季節正是鋁板、鋁卷、鋁帶等鋁產品出現進水腐蝕、氧化現象的時節。雖然在鋁板產品中有氧化鋁板這個分類,但氧化鋁板和鋁板氧化可是完全不同的事情。氧化鋁板和鋁板氧化的區別:
Rainy season is coming soon, this season is aluminum plate, aluminum coil, aluminum strip and other aluminum products appear in the water corrosion, oxidation phenomenon of the season. Although there is a classification of alumina sheets in aluminium products, the oxidation of alumina sheets and aluminium sheets is quite different. The difference between oxidation of aluminum oxide and aluminum plate is:
一、氧化鋁板一般指的是:鋁板經過酸堿氧化后,在鋁板表面形成了一層保護膜。一般的氧化膜為銀白色。如客戶有特殊要求,也可以根據客戶要求氧化成不同的顏色。
1. Alumina plate generally refers to: aluminum plate after acid-base oxidation, the surface of the aluminum plate formed a protective film. The general oxide film is silver white. If customers have special requirements, they can also be oxidized to different colors according to customer requirements.
鋁板普通氧化是指:鋁板在經過酸、堿流槽,對鋁板表面進行清洗后,在鋁板表面形成一層保護膜,有被稱為氧化膜。
The common oxidation of aluminum plate refers to the formation of a protective film on the surface of aluminum plate after cleaning the surface of aluminum plate through acid and alkali flow tank, which is called oxide film.
二、鋁板氧化一般是指鋁板或者鋁卷相連的部分出現同一樣的腐蝕現象,腐蝕面積的大小和圖案相同。
2. Aluminum plate oxidation generally refers to the same corrosion phenomenon of the aluminum plate or the part connected by the aluminum coil, and the size of the corrosion area is the same as the pattern.
造成這種情況的原因:
The reasons for this situation are:
1:在鋁板或者鋁卷包裝時,溫度過高。包裝內形成蒸汽,鋁板、鋁卷受潮,從而出現腐蝕現象。
1: when the aluminum plate or aluminum coil is packed, the temperature is too high. Steam is formed in the package, aluminum plates and aluminum rolls are damp, resulting in corrosion.
2:鋁板或者鋁卷淋雨,使雨水倒灌到包裝內。從而鋁板、鋁卷出現腐蝕現象。
2: aluminum or aluminum roll rain, so that the rain poured into the packaging. The corrosion of aluminum plates and aluminum rolls appears.
3:在濕度較大的環境下鋁板、鋁卷會出現腐蝕現象。
3: in the humidity environment, aluminum plate and aluminum coil will be corroded.
如何避免此類現象的發生:
How to avoid such phenomena:
1:將鋁板、鋁卷自然放涼后,再進行包裝。
1: naturally cool the aluminum plate and aluminum coil before packing it.
2:可借用風機對鋁板、鋁卷進行降溫。
2: borrow fan to cool aluminum plate and aluminum coil.
3:包裝時鋁板、鋁卷外部先用塑料布進行包裝,再用硬紙板包裝。
3: when packaging, aluminum and aluminum rolls are wrapped in plastic sheets first and then packed in cardboard.
4:貨物運輸過程中,交代司機蓋好篷布。
4: during the transportation of goods, the driver will cover the tarpaulin.
5:在濕度較大的環境下,在包裝內多放置一些干燥劑。并將鋁板、鋁卷放置于較為干燥的環境下。
5: in a large humidity environment, put some desiccant in the package. The aluminum plate and aluminum coil are placed in a drier environment.