實際上，鋁板加工完成后就要運輸出去送到買家手中，但很多情況就會因為這樣那樣的原因而導致在運輸過程中出現問題，那么鋁板的運輸方式是怎樣的？運輸過程中要注意些什么事項呢？
　　In fact, aluminum plate processing will be transported out to the hands of buyers, but many cases will cause problems in the process of transportation because of this and that reason, so what is the mode of transportation of aluminum plate? What should I pay attention to during transportation?
　　鋁板的運輸方式包括汽車、火車、輪船等多種交通工具。運輸過程中鋁板不得與活性化工產品和濕物料混用，同時保持車廂和船舶倉庫干燥、清潔、無污染。
　　Transportation mode of aluminum plate includes cars, trains, ships and other means of transportation. During transportation, aluminum plate shall not be mixed with active chemical products and wet materials, and at the same time keep the carriage and ship warehouse dry, clean and pollution-free.
　　鋁板的裝運好使用封閉的車廂或船庫，也可以用吊船裝運，但在運輸過程中，一定要蓋緊，并用防雨防雪板捆扎，確保包裝完好。盒子和鋁板產品不會進水，雨雪。
　　It is best to use a closed carriage or boathouse for the shipment of aluminum plates, or a crane ship for shipment, but in the process of transportation, it must be tightly covered and tied with rain and snow sheets to ensure that the packaging is intact. Boxes and aluminum products do not take in water, rain or snow.

　　轉運逆向時，鋁板好存放在倉庫中。如果存放在簡易倉庫或露天存放，必須用防雨防雪布蓋緊，底部包裝箱應加墊，墊高不小于100mm，包裝盒和成型好的鋁箔卷的吊裝、裝卸應小心輕放，以免損壞包裝盒和鋁箔。
　　When the transfer is reversed, the aluminum plate is best stored in the warehouse. If stored in a simple warehouse or open storage, must be tightly covered with rain and snow proof cloth, the bottom of the packing box should be padded, the pad height is not less than 100mm, the packaging box and formed aluminum foil roll hoisting, loading and unloading should be careful to avoid damage to the packaging box and aluminum foil.
　　雖然包裝車間已經做好了相對緊固、防潮的包裝和措施，但如果運輸過程中需要加雨布，避免鋁板包裝因天氣原因進水，裝卸時避免磕碰。鋁板安全運送到用戶手中。
　　Although the packaging workshop has done a relatively tight, moisture-proof packaging and measures, but if the transportation process needs to add rain cloth, avoid the aluminum packaging due to weather reasons to avoid water, avoid bumping during loading and unloading. The aluminum plate is safely delivered to the user.
　　另外，廠家在進行鋁板運輸之前要考慮好和哪家物流合作，畢竟同一條路線，不同的物流費用高低不同，選擇物流公司要綜合考慮，不要只看價格。那么還有不懂得可以隨時撥打http://www.speif.com網站上面的聯系電話咨詢。
　　In addition, manufacturers should consider which logistics cooperation before carrying out aluminum transportation. After all, the same route, different logistics costs are different, and the choice of logistics company should be considered comprehensively, not only look at the price. There is not know can call the above http://www.speif.com contact telephone counseling.